Network structures
6.1 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
179
Call up the command with the following parameters:
wlan max tx-power <dBm(5-20)>
The parameter has the following meaning:
Values or range of values
Transmit power in decibel-milliwatts (dBm) 5...20
The transmit power is specified.
You display the setting with the show wlan basic <wlan 0/X> command.
wlan mode (access point)
Description
With this command, you specify the transmission standard.
Note
This command is available only in access point mode.
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
To Next Page
Loading...
Need help?
General
