Configuration
3.1 System
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
40 Configuration Manual, 11/2014, C79000-G8976-C351-03
This command shows the current PROFINET IO configuration.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show pnio
The current PROFINET IO configuration is displayed.
show lldp neighbors
Description
This command shows the current content of the neighborhood table.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameter assignment:
show lldp neighbors
The neighborhood table is displayed.
To Next Page
Loading...
Need help?
General
