Siemens SCALANCE W760 Configuration Manual

Network protocols
7.5 SMTP client
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
330 Configuration Manual, 11/2014, C79000-G8976-C351-03
7.5
SMTP client
This section describes commands of the Simple Mail Transfer Protocol (SMTP).
7.5.1
show events smtp-server
Description
This command shows the configured SMTP servers.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show events smtp-server
Result
The configured SMTP servers are displayed.
7.5.2
show events sender email
Description
This command shows the configured e-mail sender address.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show events sender email

Siemens SCALANCE W760 Specifications

General

Brand	Siemens
Model	SCALANCE W760
Category	Wireless Access Point
Language	English