Siemens SCALANCE W760 Configuration Manual

Network structures
6.1 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
180 Configuration Manual, 11/2014, C79000-G8976-C351-03
Syntax
Call up the command with the following parameters:
wlan mode { show-modes |<mode>}
The parameter has the following meaning:
Parameters
Description
Values or range of values
show-modes
Lists the transmission standards.
--
mode
Value corresponding to a specif-
ic transmission standard.
•
a
IEEE 802.11a (5 GHz)
• g
IEEE 802.11g (2.4 GHz)
Is downwards compatible with IEEE 802.11b
•
n
IEEE 802.11n (2.4 GHz + 5 GHz)
Is downwards compatible with IEEE 802.11a
and IEEE 802.11g
• n-only
IEEE 802.11n (2.4 GHz + 5 GHz)
Is not downwards compatible with IEEE 802.11a
and IEEE 802.11g
Depending on the current configuration, some settings are not possible. In this case, a
message to this effect is displayed.
Result
The transmission standard is specified.
Further notes
You display the setting with the show wlan basic <wlan 0/X> command.
6.1.5.44
wlan mode (client)
Description
With this command, you specify the transmission standard.
Note
This command is only available in the client mode.

Siemens SCALANCE W760 Specifications

General

Brand	Siemens
Model	SCALANCE W760
Category	Wireless Access Point
Language	English