Network protocols
7.1 IPv4 protocol
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
263
show ip dns name-server
Description
This command shows information about the DNS servers configured on the device. The
table contains the index, the address type (e.g. IPv4) as well as the IP address and the
origin.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show ip dns name-server
The table with the information about the DNS servers is displayed.
show ip dns statistics
Description
This command shows DNS statistics. It provides information about the type and number of
queries to the DNS server.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show ip dns statistics
Information about the communication with the DNS server is displayed.
To Next Page
Loading...
Need help?
General
