Network protocols
7.5 SMTP client
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
334 Configuration Manual, 11/2014, C79000-G8976-C351-03
sender mail-address
Description
With this command, you configure the e-mail name of the sender.
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli(config-events)#
Call up the command with the following parameters:
sender mail-address <mail-address>
The parameter has the following meaning:
The e-mail name of the sender is configured.
You reset the e-mail name of the sender with the no sender mail-address.
You display the setting with the
show events sender email command.
no sender mail-address
Description
With this command, you reset the e-mail name of the sender.
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli(config-events)#
To Next Page
Loading...
Need help?
General
