Network structures
6.1 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
182 Configuration Manual, 11/2014, C79000-G8976-C351-03
The transmission standard is specified.
You display the setting with the show wlan basic <wlan 0/X> command.
With this command, you enable the outdoor mode. In outdoor mode, the selection of country-
dependent channels and the transmit power for operation are restricted for outdoor use.
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Call the command without parameter assignment:
wlan outdoor
The outdoor mode is enabled.
You display the setting with the show wlan basic <wlan 0/X> command.
You disable the function with the
no wlan outdoor command (default setting).
no wlan outdoor (Page 183)