Siemens SCALANCE W760 Configuration Manual

Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
364 Configuration Manual, 11/2014, C79000-G8976-C351-03
Syntax
Call up the command with the following parameters:
wlan security ap-radius-authenticator <index (1-2)>
The parameter has the following meaning:
Parameters
Description
Values or range of values
index
Index of the RADIUS server
1...2
Result
The RADIUS server is enabled.
Further notes
You disable the RADIUS server with the no wlan security ap-radius-authenticator
command.
You display the setting with the
show wlan security ap-radius-authenticator command.
See also
no wlan security ap-radius-authenticator (Page 364)
show wlan security ap-radius-authenticator (Access Point) (Page 361)
10.2.4.2
no wlan security ap-radius-authenticator
Description
With this command, you disable the RADIUS server.
Note
This command is available only in access point mode.
Requirement
You are in the WLAN Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan)#

Siemens SCALANCE W760 Specifications

General

Brand	Siemens
Model	SCALANCE W760
Category	Wireless Access Point
Language	English