Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
393
vap security wpa-group-key-update-interval (Access Point)
Description
With this command you specify the time after which the key is renewed.
Note
This command is available only in access point mode.
You are in the Interface Configuration mode of the VAP interface.
The command prompt is as follows:
cli (config-if-vapX-0-Y)#
Call up the command with the following parameters:
vap security wpa-group-key-update-interval {0|seconds (30-36000)}
The parameter has the following meaning:
Values or range of values
The key will not be renewed.
When the time expires (second),
30 ... 36000
The time for renewal of the key is specified.
To Next Page
Loading...
Need help?
General
