Siemens SCALANCE W760 - Show Wlan Security Keys

Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
362 Configuration Manual, 11/2014, C79000-G8976-C351-03
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameter assignment:
show wlan security ap-radius-authenticator
Result
The settings are displayed.
See also
wlan security ap-radius-authenticator (Page 363)
wlan security ap-radius-authenticator address (Page 365)
wlan security ap-radius-authenticator max-retransmit (Page 366)
wlan security ap-radius-authenticator port-number (Page 367)
wlan security ap-radius-authenticator primary (Page 368)
no wlan security ap-radius-authenticator primary (Page 369)
wlan security ap-radius-authenticator reauth-interval (Page 370)
wlan security ap-radius-authenticator reauth-mode (Page 371)
wlan security ap-radius-authenticator shared-secret (Page 372)
10.2.3
show wlan security keys
Description
This command shows a table with the WEP key of the device.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#