Siemens SCALANCE W760 - Wlan Security Ap-Radius-Authenticator Port-Number

Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
367
Syntax
Call up the command with the following parameters:
wlan security ap-radius-authenticator max-retransmit <index (1-2)> <1-254>
The parameters have the following meaning:
Parameter
Description
Values or range of values
index
Index of the RADIUS server
1...2
1-254
Number of connection attempts
1...5
Result
The maximum number of attempts to establish a connection is configured.
Further notes
You display the setting with the show wlan security ap-radius-authenticator command.
See also
show wlan security ap-radius-authenticator (Access Point) (Page 361)
10.2.4.5
wlan security ap-radius-authenticator port-number
Description
With this command, you configure the input port of the RADIUS server.
Note
This command is available only in access point mode.
Requirement
You are in the WLAN Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan)#