Siemens SCALANCE W760 Configuration Manual

Network structures
6.3 Spanning Tree
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
254 Configuration Manual, 11/2014, C79000-G8976-C351-03
Result
The range of VLANs is assigned to the MST instance.
Further notes
You cancel the assignment of the VLAN to an MST instance with the no instance command.
You delete the MST instance with the
no instance command.
You display this setting and other information with the
show spanning-tree mst
configuration
command.
6.3.5.2
no instance
Description
With this command, you cancel the assignment of a VLAN to an MST instance or delete the
MST instance.
Requirement
You are in the MSTP Configuration mode.
The command prompt is as follows:
cli(config-mst)#
Syntax
Call up the command with the following parameters:
no instance <instance-id (1-64)> [vlan <vlan-range>]
The parameters have the following meaning:
Parameter
Description
Range of values / note
instance-id
Number of the MST instance
1 ... 64
vlan
Keyword for a VLAN connection -
vlan-range
Range of VLANs that will be deleted
from the instance
enter the range limts with a hy-
phen or blank
If you specify a VLAN or a VLAN range, the assignment to an MST instance is canceled.
If you do not specify a VLAN, the MST instance is deleted.
Result
The assignment of a VLAN to an MST instance is canceled or the MST instance is deleted.

Siemens SCALANCE W760 Specifications

General

Brand	Siemens
Model	SCALANCE W760
Category	Wireless Access Point
Language	English