Siemens SCALANCE W760 Configuration Manual

Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
381
Further notes
You display the settings with the show wlan security <wlan 0/X> command.
10.2.5.7
wlan security dot1x username (client)
Description
With this command, you specify the user name for the RADIUS server.
Note
This command is only available in the client mode.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan security dot1x username <string>
The parameter has the following meaning:
Parameters
Description
Values or value table
string
User name Enter the user name for the RADIUS server. You speci-
fy the corresponding password with the
wlan security
dot1x password command.
Result
The user name is specified.
Further notes
You display the settings with the show wlan security <wlan 0/X> command.

Siemens SCALANCE W760 Specifications

General

Brand	Siemens
Model	SCALANCE W760
Category	Wireless Access Point
Language	English