Siemens SCALANCE W760 - No Snmp Filterprofile

Network protocols
7.4 SNMP
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
315
Result
The filter is created.
Further notes
You delete a filter with the no snmp filterprofile command.
You display the created filter with the
show snmp filter table command.
7.4.2.9
no snmp filterprofile
Description
With this command, you delete a filter.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp filterprofile<profile-name><OIDTree>
The parameters have the following meaning:
Parameters
Description
Range of values
profile-name
Name of the filter profile
max. 32 characters
OIDTree
Object ID Path information of the MIB tree
Result
The filter is deleted.
Further notes
You create a filter with the snmp filterprofile command.
You display the created filter with the
show snmp filter table command.