Siemens SCALANCE W760 - Show Snmp Engineid; Show Snmp Filter

Network protocols
7.4 SNMP
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
302 Configuration Manual, 11/2014, C79000-G8976-C351-03
Syntax
Call the command without parameters:
show snmp community
Result
The details of the configured SNMP communities are displayed.
7.4.1.3
show snmp engineID
Description
This command shows the SNMP identification number of the device.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp engineID
Result
The SNMP identification number of the device is displayed.
7.4.1.4
show snmp filter
Description
This command shows the configured SNMP filters.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#