Configuration
3.1 System
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
64 Configuration Manual, 11/2014, C79000-G8976-C351-03
With this command, you shut down an interface.
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Call the command without parameters:
no shutdown
The Interface is activated.
You activate the interface with the shutdown complete command.
You can display the status of this function and other information with the
show
interfaces
command.
To Next Page
Loading...
Need help?
General
