Siemens SCALANCE W760 Configuration Manual

Network structures
6.3 Spanning Tree
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
257
Syntax
Call up the command with the following parameters:
revision <revision-no(0-65535)>
The parameters have the following meaning:
Parameter
Description
Range of values / note
revision-no
Value of the revision number 0 ... 65535
Default: 0
Result
The MST region is assigned a revision number.
Further notes
You delete a revision number with the no revision command.
You display this setting and other information with the
show spanning tree mst
configuration
command.
6.3.5.6
no revision
Description
With this command, you reset the revision number of the MST region to the default value.
The default value is 0.
Requirement
You are in the MSTP Configuration mode.
The command prompt is as follows:
cli(config-mst)#
Syntax
Call the command without parameters:
no revision
Result
The revision number of the MST region is reset to the default value.

Siemens SCALANCE W760 Specifications

General

Brand	Siemens
Model	SCALANCE W760
Category	Wireless Access Point
Language	English