Siemens SCALANCE W760 - Wlan Security Authentication (Client)

Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
374 Configuration Manual, 11/2014, C79000-G8976-C351-03
10.2.5.1
wlan security authentication (client)
Description
With this command, you specify the type of authentication.
Note
This command is only available in the client mode.
Note
iPCF or iPCF-MC mode enabled
If iPCF or iPCF
-MC mode is enabled, only "Open System" with the encryption method AES
is supported in the security settings.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#