Functions specific to SCALANCE
4.4 iPCF-MC
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
98 Configuration Manual, 11/2014, C79000-G8976-C351-03
wlan ipcf-mc mgmt-scan-period (client)
Note
The command is only available with the following device:
SCALANCE W722-1 RJ-45 (MLFB 6GK5722-1FC00-0AA0 and 6GK5722-1FC00-0AB0
(US version))
With this command, you the time for the background scan interval as a multiple of the update
time.
The device is in client mode.
You are in the WLAN configuration mode.
The command prompt is as follows:
cli(config-wlan)#
Call up the command with the following parameters:
wlan ipcf-mc mgmt-scan-period <num-of-cycles (1-10)>
The parameter has the following meaning:
Values or range of values
The time is set.
You display the setting with the show wlan ipcf-mc command.
To Next Page
Loading...
Need help?
General
