Network protocols
7.8 ARP
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
340 Configuration Manual, 11/2014, C79000-G8976-C351-03
show ssl server-cert
Description
This command shows the SSL server certificate.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show ssl server-cert
The SSL server certificate is displayed.
This section describes commands of the Address Resolution Protocol (ARP).
With this command, you display the IP ARP table.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#