Siemens SCALANCE W760 - Show Snmp Inform Statistics; Show Snmp Notif

Network protocols
7.4 SNMP
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
304 Configuration Manual, 11/2014, C79000-G8976-C351-03
Syntax
Call the command without parameters:
show snmp group access
Result
The rights of the configured SNMP groups are displayed.
7.4.1.7
show snmp inform statistics
Description
This command shows the statistics of the Inform Messages.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp inform statistics
Result
The statistics of the Inform Messages are displayed.
7.4.1.8
show snmp notif
Description
With this command, you display the configured SNMP notification types.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#