Siemens SCALANCE W760 - Show Users; Wlan

Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
360 Configuration Manual, 11/2014, C79000-G8976-C351-03
10.1.2
show users
Description
This command displays the users that logged on via Telnet or SSH.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show users
Result
The logged in users are displayed.
10.2
WLAN
This section describes commands for configuring and managing wireless LANs (WLANs).
Some commands are available only in the "access point" or in the "client" mode. In these
cases, the titles have the term access point or client added to them.
Example:
wlan mode
● wlan mode (access point): The function can only be used with access points.
● wlan mode (client): The function can only be used with clients.