Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
369
Call up the command with the following parameters:
wlan security ap-radius-authenticator primary <index (1-2)>
The parameter has the following meaning:
Values or range of values
Index of the RADIUS server
The RADIUS server is configured as primary server.
You disable the setting with the no wlan security ap-radius-authenticator primary
command.
You display the setting with the
show wlan security ap-radius-authenticator command.
no wlan security ap-radius-authenticator primary (Page 369)
show wlan security ap-radius-authenticator (Access Point) (Page 361)
no wlan security ap-radius-authenticator primary
Description
With this command, you disable the primary server.
Note
This command is available only in access point mode.
You are in the WLAN Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan)#
To Next Page
Loading...
Need help?
General
