Siemens SCALANCE W760 Configuration Manual

Load control
8.1 Dynamic MAC aging
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
347
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
mac-address-table aging-time <seconds(10-1000000)>
The parameter has the following meaning:
Parameters
Description
Range of values
seconds
Life of the entry in seconds
10 ... 1000000
At system start or when using the restart command with the option memoryor factory, the
following defaults apply:
● The function is configured to 300 seconds.
Result
The value of the aging of a dynamically learned entry is configured.
Further notes
You can reset the setting to the default with the no mac-address-table aging-time command.
You display the setting with the
show mac-address-table aging-time command.

Siemens SCALANCE W760 Specifications

General

Product Type	Wireless Access Point
Frequency Bands	2.4 GHz, 5 GHz
Wireless Standards	IEEE 802.11a/b/g/n/ac
Number of Antennas	2
Power Supply	24 V DC
Operating Temperature	-20°C to +60°C
Operating Voltage	24 V DC
Protection Class	IP65
Antenna Connectors	R-SMA
Security	WPA2, WPA3