BPswitch Operators Manual
288 / 413
apply to
Focus and Iris adjustments.
To control the speed of manual camera functions:
Fast
If you wish to move faster, before touching the joystick, press the [>] motion button
and it will illuminate. Now when you move the joystick the motion will be at the
fast speed specified in Camera Control Settings window under the Joystick Speed
tab. To return to the Medium/Normal mode, press the [>] motion button, and it will
turn off.
Slow
If you wish to move slower, before touching the joystick, press the [<] motion
button and it will illuminate. Now when you move the joystick the motion will be at
the slow speed specified in Camera Control Settings window under the Joystick
Speed tab. To return to the Medium/Normal mode, press the [<] motion button,
and it will turn off.
Medium (Normal)
This is the default speed for the joystick. To manually set the speed back to
Medium, simply deselect the [<] or [>] motion button and they will go off.
NOTE: All three of the above speed setting may me adjusted, as described in Hitachi Camera
Control Settings.
Motion controls for Panasonic & Sony Cameras
Similar to the Hitachi Camera Control, Panasonic & Sony cameras have two
motion controls, Fast and Slow. Although the range may not be set, as can be
done with Hitachi, the motion controls not only affect pan, tilt and zoom joystick
functions, they also affect the focus, iris and gain knob functions. These controls
apply only to the Panasonic & Sony Camera Control and not Hitachi or
Telemetrics cameras.
To control the speed of manual camera functions:
Slow
If you wish to move slower, before touching the joystick or knobs, press the [>]
motion button and it will illuminate orange. The display will read out “Slow
To Next Page
Loading...