Broadcast Pix BPswitch - Adding Streamer Control to a Show

BPswitch Operators Manual
319 / 413
Created with the Personal Edition of HelpNDoc: Free iPhone documentation generator
Adding Streamer Control to a Show
Once installation is complete, you must now add the device to a show using one of
the six wildcard devices on the switcher.
1.
In BPswitcher, load the show to which you want to add streamer control.
Select the File, Load Show.
2.
Open PixMaster by selecting File, Edit Show.
3.
Click on Edit Show Settings and the Edit Show Settings window will open.
4.
Click on More Devices and the More Devices window will open, as shown
below.
5.
Select the desired wildcard device button to which you want to add
streamer control and a drop down menu will appear.
To select devices D-F or 4-6 select the View shifted devices checkbox.
6.
Click on ViewCast Streamer Control, and it will appear on the PixButton, as
shown below.
7.
Click on OK, to apply the Streamer Control the show, then Close in the Edit
Show Settings window and Save Show to apply all the settings.