BPswitch Operators Manual
55 / 413
Keyer Windows on the Multi-View
The Multi-View shows the contents and status of all 3 keyers. Just as with source
monitors, a keyer monitor displays the thumbnail of the content that is currently
loaded into the keyer as well as the device name, content name and tally status
for Program/Preview. Similar to the source monitors, each individual keyer window
can be independently positioned and sized.
Modifiers applied to a Key are also shown on the Multi-View in the keyer windows.
The Key transition rate and if a keyer has a DVE, Crop and/or a Reposition
applied to it appears in the mini status display above the thumbnail.
Transitioning Keys individually with the Multi-View
To Manually Bring a Key On Program:
1. Any key that is off-air (grey or orange), can be brought on-air by clicking on its
keyer thumbnail on the Multi-View. This will cause this key to fade on-air at the
rate for that keyer, and the tally underneath will change color to red.
To Manually Take a Key Off Program:
1. Any key that is on-air (red), can be taken off-air by by clicking on its thumbnail
To Next Page
Loading...