Broadcast Pix BPswitch - Locking Panels Together

BPswitch Operators Manual
388 / 413
NOTE: There is no difference in operation between the Chrome and Flash SoftPanels, either may
be used.
Locking Panels Together
The two control panels can either be “locked” together or unlocked.
Locked:
Locks together everything on all panels, so that they will be at identical
states at all times. For example, if you press on any button on the
control panel, it will now change on all SoftPanels.
Unlocked
:
The panel’s device controls on each panel can be set to different
devices, and operated independently, while the fixed switcher controls
are still locked together. For example, it may be desirable for the
graphics person to always be able control the CG, no matter what
device the Show Creator happens to be using.
To lock the the panels together:
1.
In BPswitcher, click-on the Panel drop down menu.
2.
Select the Panel Settings option.
3.
Click on Locked Panels and a check mark will appear as shown below.