Broadcast Pix BPswitch - Deck Control Settings - Topic Heading same

BPswitch Operators Manual
324 / 413
1.
In BPswitcher, load the show to which you want to add deck control. Select
the File, Load Show.
2.
Open PixMaster by selecting File, Edit Show.
3.
Click on Edit Show Settings and the Edit Show Settings window will open.
4.
Click on More Devices and the More Devices window will open, as shown
below.
5.
Select the desired wildcard device button to which you want to add deck
control and a drop down menu will appear.
To select devices D-F or 4-6 select the View shifted devices checkbox.
6.
Click on Deck Control, and it will appear on the PixButton, as shown below.
7.
Click on OK, to apply the Deck Control the show, then Close in the Edit
Show Settings window and Save Show to apply all the settings.
Deck Control Settings - topic heading same
1.
In BPswitcher go to the Setup menu and
select System Settings…, as shown on
the right.
2.
In the System Settings window, select the
Devices tab.