BPswitch Operators Manual
59 / 413
To transition only keyers in the next transition:
Click on the BGR button on the bottom of the Program monitor. Now only keyers with Trans enabled
will be transitioned.
To Fade to Black:
Click on the FTB button on the bottom of the Program monitor. The button will
illuminate blue, now click on the Program monitor.
When in black and the FTB button is illuminated red and want to fade up, click on
the Program monitor. See Fade to Black for more information.
To assign a source to a keyer:
Click on one of the key Assign buttons, it will illuminate
blue. Then click on the thumbnail of the source you wish
to assign, and its key thumbnail will change to show the
new key source. The mouse course will change to a key
icon. Once a source is selected, the Assign button will
turn off.
Multi-View System Settings
Depending on the production or type of user, there are system settings to enable
the options described in the previous section.
To disable & hide controls on the output monitors:
In BPswitcher, click on Setup and a drop down
window will appear, then select System
Settings… as shown on the right.
The System Settings window will appear.
To Next Page
Loading...