Launch PixMaster by double-clicking on the PixMaster icon on the
desktop, as illustrated at the right. This will open the PixMaster:
Start Window as shown below. The main Broadcast Pix Switcher
application needs to be closed in order to launch PixMaster.
Select a starting point for this show by
selecting one of the previous shows, which
could include the Sample Show that shipped
with your system. When you select it, it will
highlight, as shown at the right.
The starting point determines how your
sources are mapped to the switcher, as well
as the content assigned to each source.
You can then edit from that starting point.
You may want to create one or more default
shows as your universal starting point.
To Next Page
Loading...