Cypress FM4 Series - Page 613

CHAPTER 12: I/O Port
FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E 613
[bit28:26] IC02S: IC02 Input Select bits
Selects input for IC02.
bit
Description
Reading
Reads out the register value.
Writing
000
Uses IC02_0 at the input pin of the input capture IC02. [Initial value]
001
Same as Writing 000.
010
Uses IC02_1 at the input pin of the input capture IC02.
011
Uses IC02_2 at the input pin of the input capture IC02.
100
Uses internal macro MFS ch.2 LSYN for input of the input capture IC02.
101
Uses internal macro MFS ch.6 LSYN for input of the input capture IC02.
110
Setting is prohibited.
111
Setting is prohibited.
[bit25:23] IC01S: IC01 Input Select bits
Selects input for IC01.
bit
Description
Reading
Reads out the register value.
Writing
000
Uses IC01_0 at the input pin of the input capture IC01. [Initial value]
001
Same as Writing 000.
010
Uses IC01_1 at the input pin of the input capture IC01.
011
Uses IC01_2 at the input pin of the input capture IC01.
100
Uses internal macro MFS ch.1 LSYN for input of the input capture IC01.
101
Uses internal macro MFS ch.5 LSYN for input of the input capture IC01.
110
Setting is prohibited.
111
Setting is prohibited.
[bit22:20] IC00S: IC00 Input Select bits
Selects input for IC00.
bit
Description
Reading
Reads out the register value.
Writing
000
Uses IC00_0 at the input pin of the input capture IC00. [Initial value]
001
Same as Writing 000.
010
Uses IC00_1 at the input pin of the input capture IC00.
011
Uses IC00_2 at the input pin of the input capture IC00.
100
Uses internal macro MFS ch.0 LSYN for input of the input capture IC00.
101
Uses internal macro MFS ch.4 LSYN for input of the input capture IC00.
110
Setting is prohibited.
111
Setting is prohibited.
[bit19:18] FRCK0S: FRCK0 Input Select bits
Selects input for FRCK0.
bit
Description
Reading
Reads out the register value.
Writing
00
Uses FRCK0_0 at the input pin of the free-run timer FRCK0. [Initial value]
01
Same as Writing 00.
10
Uses FRCK0_1 at the input pin of the free-run timer FRCK0.
11
Uses FRCK0_2 at the input pin of the free-run timer FRCK0.