CHAPTER 12: I/O Port
702 FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E
[bit11:10] SCS71E: SCS71 Input Select bits
Selects input/output for SCS71. For TYPE3-M4, TYPE5-M4 products, set this bit with SCS7B of EPFR16.
Reads out the register value.
Does not produce output of MFS ch7 SCS71. [Initial value]
Uses SCS71_0 at the output pin of MFS ch.7 SCS71.
Uses SCS71_1 at the output pin of MFS ch.7 SCS71.
[bit9:8] SCS70E: SCS70 Input Select bits
Selects input/output for SCS70. For TYPE3-M4, TYPE4-M4, TYPE5-M4 products, set this bit with SCS7B
of EPFR16.
Reads out the register value.
Does not produce output of MFS ch7 SCS70. [Initial value]
Uses SCS70_0 at the output pin of MFS ch.7 SCS70.
Uses SCS70_1 at the output pin of MFS ch.7 SCS70.
[bit7:6] SCS63E: SCS63 Input Select bits
Selects input/output for SCS63. For TYPE3-M4, TYPE5-M4 products, set this bit with SCS6B of EPFR16.
Reads out the register value.
Does not produce output of MFS ch6 SCS63. [Initial value]
Uses SCS63_0 at the output pin of MFS ch.6 SCS63.
Uses SCS63_1 at the output pin of MFS ch.6 SCS63.
[bit5:4] SCS62E: SCS62 Input Select bits
Selects input/output for SCS62. For TYPE3-M4, TYPE5-M4 products, set this bit with SCS6B of EPFR16.
Reads out the register value.
Does not produce output of MFS ch6 SCS62. [Initial value]
Uses SCS62_0 at the output pin of MFS ch.6 SCS62.
Uses SCS62_1 at the output pin of MFS ch.6 SCS62.
[bit3:2] SCS61E: SCS61 Input Select bits
Selects input/output for SCS61. For TYPE3-M4, TYPE5-M4 products, set this bit with SCS6B of EPFR16.
Reads out the register value.
Does not produce output of MFS ch6 SCS61. [Initial value]
Uses SCS61_0 at the output pin of MFS ch.6 SCS61.
Uses SCS61_1 at the output pin of MFS ch.6 SCS61.
[bit1:0] SCS60E: SCS60 Input Select bits
To Next Page
Loading...
