Cypress FM4 Series - Page 703

CHAPTER 12: I/O Port
FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E 703
Selects input/output for SCS60. For TYPE3-M4, TYPE4-M4, TYPE5-M4 products, set this bit with SCS6B
of EPFR16.
bit
Description
Reading
Reads out the register value.
Writing
00
Does not produce output of MFS ch6 SCS60. [Initial value]
01
Uses SCS60_0 at the output pin of MFS ch.6 SCS60.
10
Uses SCS60_1 at the output pin of MFS ch.6 SCS60.
11
Setting is prohibited.
Notes:
− This register does not exist in TYPE1-M4, TYPE2-M4, TYPE6-M4 products.
− This register is not initialized by deep standby transition reset.