CHAPTER 12: I/O Port
726 FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E
[bit9:8] PNL_FV_SYNCE: PNL_ FV_SYNC Output Select bits
Selects output for PNL_FV_SYNC.
Reads out the register value.
Does not produce output of GDC Panel PNL_FV_SYNC. [Initial value]
Uses PNL_FV_SYNC_0 at the output pin of GDC PNL_FV_SYNC.
[bit7:6] PNL_LEE: PNL_LE Output Select bits
Selects output for PNL_LE.
Reads out the register value.
Does not produce output of GDC Panel PNL_LE. [Initial value]
Uses PNL_LE_0 at the output pin of GDC Panel PNL_LE.
[bit5:4] PNL_DENE: PNL_DEN Output Select bits
Selects output for PNL_DEN.
Reads out the register value.
Does not produce output of GDC Panel PNL_DEN. [Initial value]
Uses PNL_DEN_0 at the output pin of GDC Panel PNL_DEN.
[bit3:2] PNL_DCLKE: PNL_DCLK Output Select bits
Selects output for PNL_DCLK.
Reads out the register value.
Does not produce output of GDC Panel PNL_DCLK. [Initial value]
Uses PNL_DCLK_0 at the output pin of GDC Panel PNL_DCLK.
[bit1:0] PNL_PWEE: PNL_PWE Output Select bits
Selects output for PNL_PWE.
Reads out the register value.
Does not produce output of GDC Panel PNL_PWE. [Initial value]
Uses PNL_PWE_0 at the output pin of GDC Panel PNL_PWE.
To Next Page
Loading...
