NXP Semiconductors KL25 Series - Service COP Register (SIM_SRVCOP); Functional Description

12.2.19 Service COP Register (SIM_SRVCOP)
Address: 4004_7000h base + 1104h offset = 4004_8104h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
W
Reserved SRVCOP
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
SIM_SRVCOP field descriptions
Field Description
31–8
Reserved
This field is reserved.
7–0
SRVCOP
Sevice COP Register
Write 0x55 and then 0xAA (in that order) to reset the COP timeout counter.
12.3 Functional description
See Introduction section.
Functional description
KL25 Sub-Family Reference Manual, Rev. 3, September 2012
216 Freescale Semiconductor, Inc.