EasyManua.ls Logo

NXP Semiconductors KL25 Series - Chapter 34 Real Time Clock (RTC); 34.1.1 Features

NXP Semiconductors KL25 Series
807 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 34
Real Time Clock (RTC)
34.1 Introduction
NOTE
For the chip-specific implementation details of this module's
instances see the chip configuration information.
34.1.1 Features
The RTC module features include:
32-bit seconds counter with roll-over protection and 32-bit alarm
16-bit prescaler with compensation that can correct errors between 0.12 ppm and
3906 ppm
Register write protection
Lock register requires POR or software reset to enable write access
1 Hz square wave output
34.1.2 Modes of operation
The RTC remains functional in all low power modes and can generate an interrupt to exit
any low power mode.
KL25 Sub-Family Reference Manual, Rev. 3, September 2012
Freescale Semiconductor, Inc. 597

Table of Contents

Related product manuals