EasyManua.ls Logo

NXP Semiconductors KL25 Series - 3.4.2 System Mode Controller (SMC) Configuration; 3.4.3 PMC Configuration

NXP Semiconductors KL25 Series
807 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.4.2 System Mode Controller (SMC) Configuration
This section summarizes how the module has been configured in the chip. For a
comprehensive description of the module itself, see the module’s dedicated chapter.
Power Management
Controller (PMC)
Register
access
Peripheral
bridge
System Mode
Controller (SMC)
Resets
Figure 3-5. System Mode Controller configuration
Table 3-12. Reference links to related information
Topic Related module Reference
Full description System Mode
Controller (SMC)
SMC
System memory map System memory map
Power management Power management
Power management
controller (PMC)
PMC
Low-Leakage Wakeup
Unit (LLWU)
LLWU
Reset Control Module
(RCM)
Reset
3.4.2.1 VLLS2 not supported
VLLS2 power mode is not supported on this device.
3.4.3 PMC Configuration
This section summarizes how the module has been configured in the chip. For a
comprehensive description of the module itself, see the module’s dedicated chapter.
Chapter 3 Chip Configuration
KL25 Sub-Family Reference Manual, Rev. 3, September 2012
Freescale Semiconductor, Inc. 57

Table of Contents

Related product manuals