NXP Semiconductors KL25 Series - Computer Operating Properly (COP) Watchdog Configuration

DMA Controller
Crossbar switch
Requests
Peripheral
bridge 0
Register
access
Transfers
DMA Multiplexer
Figure 3-12. DMA Controller configuration
Table 3-21. Reference links to related information
Topic Related module Reference
Full description DMA controller DMA controller
System memory map System memory map
Clocking Clock distribution
Power management Power management
Crossbar switch Crossbar switch Crossbar switch
Requests DMA request sources
3.4.10 Computer Operating Properly (COP) Watchdog
Configuration
This section summarizes how the module has been configured in the chip.
WDOG
Mode Controller
Peripheral
bridge 0
Register
access
Figure 3-13. COP watchdog configuration
Table 3-22. Reference links to related information
Topic Related module Reference
Clocking Clock distribution
Power management Power management
Table continues on the next page...
Chapter 3 Chip Configuration
KL25 Sub-Family Reference Manual, Rev. 3, September 2012
Freescale Semiconductor, Inc. 67