To control the Iris
Turn the second knob labeled Iris. Turn to the left to close the Iris, turn to the
right to open it. To set the camera to automatic Iris, press the [Start Auto
Iris] PixButton in the PixPad. The display will show Auto Iris On, as shown
below. To turn off Auto Iris and to manually adjust the iris, simply turn the Iris
knob.
To control the Gain
Turn the third knob labeled Gain. Turn to the left to reduce the amount of
gain, turn to the right to increase the amount of gain. Depending on the
Panasonic camera the range is 0db to 12db in step, 15db, 18db or AGC on.
To control the White Balance
There are 4 options for white balance, from preset to manual to automatic.
To set the camera to automatically track the white balance for different
lighting scenarios, press the [White Bal A.T.W] PixButton in the PixPad. The
display will show White Bal ATW, as shown below.
To set the camera to an indoor 3200K color temperature preset, press the
[White Bal Inside] PixButton in the PixPad. The display will show White
Balance Inside, as shown below.
To set the camera to an outdoor 5600K color temperature preset, press the
[White Bal Outsid] PixButton in the PixPad. The display will show White
Balance Outside, as shown below.
To Next Page
Loading...