Broadcast Pix BPswitch - Page 329

BPswitch Operators Manual
329 / 413
To pause/stop a clip:
1.
In the motion control section, select the [>] motion control button
and the button will turn off, as shown on the right.
The timecode will stop in the display.
To rewind a clip:
1.
Ensure that the desired clip is selected, as described in the
previous section.
2.
In the Controls PixPad, select the [Fast Rew] PixButton, as shown
on the right.
The clip will rewind at 2X speed.
3.
Select the [Fast Rew] PixButton again.
The clip will rewind at 4X speed.
4.
Select the [Fast Rew] PixButton again.
The clip will rewind at 8X speed.
5.
Select the [Fast Rew] PixButton again.
The clip will rewind at 16X speed.
When the clip reaches the start of the clip, rewind will stop.
6.
To pause the clip from rewinding, select the [>] motion control
button.
To fast forward a clip:
1.
Ensure that the desired clip is selected, as described in the
previous section.
2.
In the Controls PixPad, select the [Fast Fwd] PixButton, as shown
on the right.
The clip will fast forward at 2X speed.
3.
Select the [Fast Fwd] PixButton again.
The clip will fast forward at 4X speed.
4.
Select the [Fast Fwd] PixButton again.