BPswitch Operators Manual
403 / 413
Find the IP address of the NIC 1, wireless Connection
by navigating to the Network Connections window and
double-clicking Local Area Connection, as shown on
the right. In this case 10.0.0.51.
Launch the iPixPad application on the Apple iPhone or
iPod Touch by clicking the Broadcast Pix logo on the
home screen, as shown on the right.
The Broadcast Pix splash screen will appear. Enter the
IP address of the Broadcast Pix system
In the IP Address text box, in this case 10.0.0.51. Click
the Done button on the virtual keyboard.
If the application connects you will receive a
‘Successfully Connected’ message.
If no wireless network can be found a message ‘Cannot
Connect to the Broadcast Pix Studio’
will appear. Go to the wireless network settings on the
iPhone/iPod to configure the network.
Click on the Done button to hide the keyboard.
The app will attempt to connect to the system, if it
successfully connects the PixPad will appear. If not,
verify the connect and IP address.
To Next Page
Loading...