Broadcast Pix BPswitch - Page 74

BPswitch Operators Manual
74 / 413
The Multi-View and display will start to
update.
2.
To pause the countdown, press the [<]
motion control button, and the timer will
stop and the button will no longer be
illuminated, as shown on the right.
3.
To continue counting down from the
paused time, press the [<] motion control
button, the button will illuminate orange.
4.
To reset the countdown to the start, press
the [|<<] motion control button.
The countdown will stop (if it was playing),
and reset automatically to the last
countdown time used.
5.
When a countdown reaches the end/0,
the counter has 2 modes, either stop at
zero or start counting up to show the
expired time.
To have a countdown timer stop at zero,
select the [Stop at Zero] PixButton, the
display will now read out Count stops at
zero, as shown on the right.
To have the counter reverse and start
counting up, select the [Go Up at Zero]
PixButton, the display will now read
Count reverses at zero, as shown on the
right.
To control the count up (Stopwatch) timer:
1.
To start counting up, press the [>] motion
control button, it will illuminate orange, as
shown on the right.
The Multi-View and display will start to
update.
2.
To pause the stopwatch, press the [>] motion
control button, and the timer will stop and the
button will no longer be illuminated, as shown