CHAPTER 7-2: VBAT Domain(A)
256 FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E
− PWRITE operation waveform
The save data is output from the buffer at a falling edge of the transfer clock and is written to the register
at a rising edge of the transfer clock.
One transfer clock is required for preprocessing before the start of a transfer.
− PREAD operation waveform
The recall data is output from the register at a rising edge of the transfer clock and is written to the buffer
at a falling edge of the transfer clock.
One transfer clock is required for preprocessing before the start of a transfer and one transfer clock is
also required for postprocessing after the end of a transfer.
To Next Page
Loading...
