Keithley 4200A-SCS

Section
13: LPT library function reference Model 4200A-SCS Parameter Analyzer
Reference Manual
13-184 4200A-901-01 Rev. C / February 2017
smeasf
This command returns the frequencies used for a sweep.
Usage
int smeasf(int instr_id, double *freq_arr);
instr_id
The instrument identification code of the 4210-CVU:
CVU1
freq_arr
Returned array of test frequencies
Details
This command returns the present test frequencies used for a sweep. The frequency values are
returned in an array. The frequency values are posted to Clarius in Analyze after the test has finished.
You can use the smeasfRT command to return sourced sweep frequency values in an array. It posts
the frequency values to Clarius in real time.
Use the measf command to return the frequency used for a single measurement.
Also see
measf (on page 13-177)
smeasfRT (on page 13-185)