In this section:
Keithley Configuration Utility (KCon) ........................................ 7-1
KCon main window .................................................................. 7-2
Configuration Navigator ........................................................... 7-3
Add an external instrument ...................................................... 7-4
Remove an external instrument ............................................... 7-9
Validate Configuration .............................................................. 7-9
Update preamplifier, RPM, and CVIV Configurations ............. 7-10
Save ....................................................................................... 7-11
System Configuration Summary ............................................. 7-11
System Configuration properties ............................................ 7-12
KXCI Settings ......................................................................... 7-16
Tools ...................................................................................... 7-20
KCon Learning Center ........................................................... 7-22
Keithley Configuration Utility (KCon)
You use the Keithley Configuration Utility (KCon) to manage the configuration of the Keithley
Instruments 4200A-SCS and all external system components supported by the Clarius
+
applications.
You can add, configure, and remove supported switch matrices, external GPIB instruments, and
probe stations from the system configuration using KCon. KCon also provides diagnostic and
troubleshooting functions.
If you add an instrument to the system, or change connections between the measurement
instrumentation and the switch matrix, you must run KCon to update the system configuration.
Before starting KCon, ensure that Clarius is not running. You cannot modify the system configuration
while Clarius is running.
Section 7
Keithley Configuration Utility (KCon)
To Next Page
Loading...
Need help?
General
