6: Clarius Model 4200A-SCS Parameter Analyzer
6-232 4200A-901-01 Rev. C / February 2017
MAVG Formulator function
Returns a new column (vector) consisting of the moving averages of successive groups of data points from
another column (vector).
Usage
MAVG(V, N)
The name of any column (vector) in the Data Series list or any operand
The number of data points to be averaged in each group
Details
You can configure the number of data points in a group.
If N = 3 and V contains the 12 values X1, X2, X3, X4, X5, ... , X10, X11, X12, then MAVG returns a
column (vector) that contains the following values:
#REF, (X1 + X2 + X3)/3, (X2 + X3+ X4)/3, (X3 + X4+ X5)/3, ... (X10 + X11+ X12)/3,
#REF
The new column’s values may contain instances of #REF (as shown above) because MAVG uses cells
from both sides of the target cell for its calculation.
Example
Also see
None
MAX Formulator function
Searches all values in a column (vector) and returns the maximum value.
Usage
MAX(Value)
The name of any column (vector) in the Data Series list
Example
MAXGM = MAX(DIFF(DRAINI, GATEV))
Also see
None
To Next Page
Loading...
Need help?
General
