13: LPT library function reference Model 4200A-SCS Parameter Analyzer
13-208 4200A-901-01 Rev. C / February 2017
Codes with positive values are statuses or updates. Codes with negative values are errors and
warnings.
Each error code number is associated with a brief text explanation. However, many of the error texts
are customized with specific information, such as a particular SMU or ID number. See the
Customized error texts (on page 13-208
) for an explanation of the type of customized data.
In addition to error codes, some conditions may prevent a valid measurement condition. In these
cases, the reported measurement value reports a condition. This is usually a large number with an
exponent of 10
22
or 10
23
. See Large number reported readings and explanations (on page 13-214) for
the conditions associated with these large numbers.
Customized error texts
Key Explanation
Signed decimal number — may be a parameter index or GPIB address
%s String, such as "SMU1" or other test resource
Hexadecimal number, 4 places
Hexadecimal number, 8 places
Code status or error titles
Code Status or error titles
RPM: Invalid Configuration Requested
RPM: Returned ID Error Response
RPM: Command Response Timeout
PMU: Temperature Within Normal Range
PMU: High Temperature Limit Exceeded
PMU: Measure Program Error
PMU: Source Program Error
PMU: Transmission to analog from digital error
PMU: Handshake from analog to digital error
PMU: DA Communication Timeout
PMU: Invalid Attributes in SW Command
LPTLib is executing function %s on instrument ID %d.
%s is no longer in thermal shutdown.
%s VXIBus device busy (command ID %04x). Timed out after %g seconds.
%s VXIbus transaction recovered after %u timeouts.
To Next Page
Loading...
Need help?
General
