Keithley 4200A-SCS

Section
6: Clarius Model 4200A-SCS Parameter Analyzer
Reference Manual
6-2 4200A-901-01 Rev. C / February 2017
Clarius interface
The Clarius interface allows you to:
• Build and edit project and execution sequences.
• Configure tests.
• Execute tests and actions, such as switch matrix connections and prober movements, including:
 A single test for one device (such as a transistor, diode, resistor, capacitor).
 A test sequence for one device.
 Test sequences for multiple devices. For example, test all the devices contacted by a prober
at a location on a semiconductor wafer.
 The test sequences of an entire project, which may include multiple prober touchdowns for a
single semiconductor die
• View test and analysis results.
• Analyze test results using built-in parameter extraction tools.
Figure 210: Clarius interface