-SCS Parameter Analyzer Reference Manual Section 13:
LPT library function reference
4200A-901-01 Rev. C / February 2017 13-207
LPT Library Status and Error codes
Error codes are displayed whenever an invalid parameter or configuration occurs. The messages
associated with the error codes describe the error condition to help the user module programmer or
user determine how to address the error. Once an error occurs, the response of the user module to
the error depends on how the user module is programmed. If a user module does not have any error
handling, an initial error could cause additional errors on following LPT commands.
Library status and error codes are reported in Clarius in the message area.
Figure 519: LPT error codes in the Clarius message areas
To Next Page
Loading...
